| Patented
: Taiwan , U.S.A. |
- Straight motion and precise crimping.
- Cuts, strips, and crimps all kinds of modular plug
without changing modular (DIE) Set.
- More in one for crimping Solid &
Stranded wire. Work with all standard plugs : AMP, SS , AT&T
licence..etc.
- Tool UT-200/200R design with 10 position
punches. For crimping 8P8C plug, please use the AMP 8P8C plug that with 2
cavities on each side as Fig 1.
- For stripping, there is a length guide at inside
of 6mm area. Insert 4P or 6P conductor wire touch the length guide (Guide By Zinc
Plating) then press handles and pull wire to get right stripping. As 12mm is
decided by cutting blade. Insert 8P or 10P conductor wire over cutting blade, so the tool
cuts and strips wire at the same time.
|
|
|
- Tool 2008/2008R design with 8 position
punches. For crimping the ordinary 8P8C plug. This kind of 8P plug without additional
cavity on each side as Fig 2.
- UT-200/200R/2008/2008R parts are
all made by metal. All are rigid and durable.
- Built-in cutter on rear side and stripper on front
side.
- For stripping round solid telephone wire , tool UT-501
is effective and recommendable.
- Adjusting the 6P guide for crimping : use a
"_" shape SCREW DRIVER to set the guide to right side for crimping normal 6P
plug , and set the guide to left side for crimping DEC plugs.
|
